Expert Answers about Jayco Eagle HT Travel Trailer
- SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ Close to 6" Square Jack Feet
- We do have the correct SnapPad's that you need but the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 5-1/2" Square Jack Feet # SN68FR would not be the correct ones if you have 6" feet.
The correct SnapPads would be the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet # SN99FR.
The SnapPad # SN99FR are for 5-3/4" to 6" square pads so they will work for your feet measuring close 6".
view full answer... - Will Roadmaster Comfort Ride Shock Absorbers Work on 2018 Jayco Eagle HT Travel Trailer
- The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers # RM-2460 is designed to fit 3 inch diameter axles, and based on my research, this is the size of axle that is on your 2018 Jayco Eagle HT travel trailer.
You will need to verify that with a quick measurement just to be sure, but if you do in fact have 3 inch diameter axles then you can absolutely use the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers # RM-2460.
Once installed these will give you a...
view full answer... - Slide Out Toppers for Slide Outs Measuring 128" and 145"
- As long as the measurements you provided are taken from the outside of the flange to the outside of the flange on your slide out(s) then then following are the correct white slide out toppers for your travel trailer.
127-5/16": Solera RV Slide-Out Awning # LCV000163295
144-3/4": Solera RV Slide-Out Awning # LCV000163298
These are both white slide outs and come with the brackets, hardware, and awning rail needed for installation.
view full answer... - Equal-i-zer Weight Distribution Hitch For 12,000 lb GVWR Trailer
- When I took a look at the specs of your 2019 Jayco Eagle 332CBOK, it said the trailer had a GVWR of 12,000 lbs, and based on that we know your tongue weight is going to be in the 1,500 lb range. With that in mind, there is one option for an Equal-i-zer weight distribution hitch with the needed capacity for trailer:
- Equal-i-zer Weight Distribution System with 4-Point Sway Control # EQ64FR
This system is designed to work with trailers that have a total loaded tongue weight between 1,200...
view full answer... - Compatibility of Viair RV Winterizing Kit # VA27WR With Viair Compressor Systems
- Per Viair their RV Winterizing Kit # VA27WR can only be used with the following compressor systems.
Viair Automatic RV Portable Air Compressor for Class C RVs - 150 psi - 2.30 cfm # VA87WR
Viair Automatic RV Portable Air Compressor for Class A RVs - 150 psi - 1.80 cfm # VA59WR
Viair BaseCamp Heavy Duty OnBoard Air Compressor with 2 Gallon Tank - 150 psi - 2.62 cfm # VA26WR
Viair Interstate Constant Duty Onboard Air Compressor with 1.5 Gallon Tank - 200 psi - 1.86 cfm # VA58WR
Viair does...
view full answer... - What Happens if One Generator in Parallel Setup Stops Running
- A 50 amp plug like what the parallel kit part # 333-0007 with two of the Firman Generators # FIR54FR puts out 25 amps per leg of the 50 amp connector. So if you lost one of the generators it would basically put out 25 amps.
view full answer... - Compatibility of Curt C17131 Shank With Eaz Lift Weight Distribution Head
- Weight distribution shanks typically have industry standard bolt hole spacing of 1-1/4 inches on center like the
Curt # C17131 shank you'd looked at. If your Eaz Lift weight distribution head has the same bolt spacing, the 2-1/2 inch hitch compatible shank will work perfectly for you. I've linked to a product description video featuring the Curt # C17131 weight distribution shank.
view full answer...
Go To Results